Saturday, November 5, 2011

winter is approaching...

Life of a motorcycle roadracer in Canada.  Step one, make sure your tire supply for next year is secured in a nice warm environment.  Best to buy tires at the end of the season, as they are often cheaper.  Next you need to find a spot so they don't get subjected to the -40 degree (celcius) temps we can get over the winter here on the prairies.  Short of a heated garage, the downstairs exercize room will do nicely...
These include the 120/180 michelins that I am gonna try on the wider rear rim of the 650.
Next I took out the husky engine to give it a once over to eliminate any possibilities of the backfire at idle.  Timing was correct, valve gap was checked and put to spec.  With only .002" gap, I needed to buy a new feeler gauge.  Nothing seemed drastically out, but it was piece of mind to set it again.  Easy to do as well.  TDC was found by removing the clutch cover and using the punch marks to set TDC.  Gave me a chance to remove and clean the secondary metal screen filter buried into the case.  Nice to see how clean that was.  Will check valve gaps every time I clean that filter.  Makes sense to do them at the same time.
Less than a block from where I work is a Husky dealer -- no bikes, but mowers and chainsaws, I checked to see if they could order in gaskets and filters, and with some digging on their part, they indicated they could.  Cool, as I need a new water pump gasket after removing the head to check the timing mark on the camshaft sprocket.  Got a couple of spares as well.  Thus, everything now points to a larger pilot jet/richer idle circuit as the solution to the idle issues.  Unfortunately, will be a long wait until I can start the bike again.  Hopefully spring comes early!

On another note, the year-end awards were handed out a week or two ago.  Was presented with this.  A nice reward for the year.  Ended the Thunderbike class in 5th. 

Thursday, October 27, 2011

mitovarna

Here is a video of the bike running, with my audio commentary concerning what is apparently a lean condition evidenced by the backfire you hear.  Like many things, the advice/suggestions to deal with the condition are often contradictory...

According to online forums, the backfire could be caused by a lean condition, or an exhaust leak.  Of course, timing could be the culprit, which is evidenced by the very hot headers even at idle.  However, many mx450 engines do this, so glowing headers do not necessarily mean a lean condition.  There is no exhaust leak in the pipe, but the slip fit by the muffler is somewhat suspect, but that shouldn't cause the backfire alone.  Finally, nonstandard pipe and carb is no help, so the baseline to start is nonexistent.  Since the advent of fuel injection, no one stocks carb parts, so pilot jets will need to be ordered (already on the way...)  The joys of building and fabricating!!!  I'll get it figured.  Over the winter I will likely drop the engine and do a full inspection -- valves, timing, filters, etc.  Will have lots of time to do it!

Sunday, October 23, 2011

Monday, October 17, 2011

mito details

Some pics for your enjoyment.  Waiting on a $9 part to check to see if I've got the cooling system fixed.  Rad came from Germany quicker than a rad cap came from the US.  Typical teutonic efficiency.



















Monday, October 3, 2011

new clothes

Had some time with an extended fall to get the new fairings mounted and painted.  Clear coat applied over the top.  Plain numbers for now... or in compliance with AMA rules...?

Also still working on the mitovarna.  Since getting the completed exhaust back from cycleboyz, have gotten it running.  Still facing a typical bugbear -- cooling.  Seems to be a regular problem with most of my projects, save the klx400.  The KTM rad sits too low, and my theory is that despite purging the system of air, I still had a vapour lock/cavitation issue.  I have seen pictures of this exact frame and this exact engine, but the radiator used was a mito rad.  A bit small, but it would be better than what appeared to be no water flow that I was experiencing to date.  So, I will simply copy what apparently works, so a mito rad is on the way.  Cycleworld did an article on a crf450 engined mito, with again some fancy plumbing but the mito rad as a base.  I found a complete cooling system off of ebay Germany, so I will see if this works better.  Hopefully it gets here soon, as I would like to put the mito to bed for the winter knowing that it runs (which it doesn) but that it is adequately cooled (not yet).  I also tore the entire machine apart this past weekend, and rebuilt it wet -- using grease, etc on the bearing surfaces.  Went together nicely, and I think the suspension as is is not a million miles off.  Still need some minor parts -- a shipment of husky-specific stuff is on the way, a jet kit from thumpertalk, and some spacers to fit the r6 front caliper.  Some brake hoses, and I welded up a tubing mount for the rear muffler.  Not seen below due to it being painted.  IF I get the mito rad to work, I will be a bit pissed, as the radiator flares on the sides of the fairing will be made redundant.  Oh well... the bike still looks pretty cool.



Saturday, September 17, 2011

Round 5 Report

Weather was forecast to be beautiful all weekend, and the predictions turned out to be true.  As an extra bonus, my folks were coming out to join me as well.  Dad would be able to lend a hand in the pits, and while mom is definately not a race fan, they offered to let me sleep on the spare bed in the hotel in Gimli.  So only 1 night of camping in the back of the car -- feeling like a factory racer!
As I had wrapped up the ULGP category already (I ended up winning by 15 points) I didn't bother bringing the tigcraft -- actually, most of it had been sold off by now (more $$$ to finish the husky).  So only 3 races this weekend.
Practices
Practices went well -- the continued modifications/tweaking of the bike are making it more and more comfortable, which will always allow me to go faster with less drama.  The rearsets were huge, as I was no longer griding my boots away; however the chin fairing was developing a sizeable hole on the right hand side due to turn 4.  I guess I was getting the bike heeled 'reet over since the repaving smoothed out the entrance to that turn.  Took a bit longer, but the low 1:06s did come, sadly no 1:05s.
Race 1:  Cdn Thunder GP
Check out the video:




My apologies, I think I now can post 15min+ videos, but there was no need, I wasn't able to pass Jason at the end, so another fighting 5th.





  Race 2:  Cdn Thunder #2:  10 laps
I was most happy with this race, perhaps my favorite from all season.  A bit of argy-bargy going into turn 1 on the first lap, but I was able to get into 4th and stay there, keep Wilson on his TZ in sight the whole race, and turn a series of 1:06 laps times -- finished 6 seconds out of 3rd, and 7 seconds ahead of the 5th place rider.  A boring race, actually, but technically solid.  Unfortunately, no video... some goofiness with the camera -- also affected race 3.

Race 3:  Cdn Thunder #3:  10 laps
A weird race for me -- felt like I was going faster, but I couldn't get out of the 1:07s -- neither could Jason just ahead in 4th, but I couldn't get by him.  A race pace similar to my pace in Race 2 would've secured another 4th, but I couldn't do it.  5th by 2 seconds, half a minute ahead of 6th.  Not the greatest way to end the season, but I drove home with the realization that I have a lot of rooom to go faster, especially going into turn 1, where the most time is made up.

Overall, I finished the season in 5th place in Cdn Thunder.  Not bad for my first season "back"... to start the "whine" flowing, the other bikes and riders ahead of me have either been at it for longer, or have obviously faster machines.  Racing an essentially stock ex650 against a Buell 1200 or a GP 250 bike won't be easy by any stretch.  Somehow, however, Doug's 650 is incredibly fast and he is a talented rider.  To make things worse, Pete turned a 1:02 on the weekend on his Buell, which puts him in another postal code compared to my laptimes.  I think my season-long dices with Jason, who you see a lot in my videos and his "pipe and dyno tune" SV show the parity between our bikes.  Whine session over -- I'll get 'em next year!

Now what?  The off season is upon us.  Dad was kind enough to make another bike part delivery for me --- the 650 full fairing is now being test-fitted to the ex -- even coming from an identical bike, some modifications and tweaks need to be made.  A slipper clutch is inbound, and perhaps some new rubber.  One of my competitors tuned his sv up, and while it was a rocket, it also had a catastrophic failure in race 2 on Sunday -- as in, thanks for the oil pan, piece of case sitting in a bath of oil, style failure.  Not interested in risking that -- so the exhaust experiement and perhaps a lightened flywheel will be the extent of the souping up this winter.  That, and finishing off the Husky.  Of course, I will keep you posted with updates and pictures...                                                                                                                     

Thursday, September 1, 2011